Login

1. Polished Concrete Products

  1. Smartkrete Densifier XL: A lithium based concrete surface densifier hardener which dramatically increases surface hardeness, polish quality and reflectivity. Improves abrasion resistance, stain resistance reduces dusting, promotes a higher polish and is UV stable.
  2. Smartkrete Smartguard SP: Polish and stain protector. Increases clarity and shine, enhances color, reduces surface abrasion, protects against acid stains, uv stable and eliminates the need for liquid waxes, polishes and other common coatings.

2. Concrete Staining Products

  1. FSI Acid Stain: A combination of hydrochloric acid, surfactants, water and metalic ions. The solution causes a chemical reaction with the Portland cement in the concrete when it is correctly applied. The colors that are achieved are permanent and depend upon the chemical makeup of the concrete where the product is being applied. The colors and tones of the floor vary from concrete to concrete. The uniqueness of the product is what makes acid stained concrete a highly desired flooring option. No two such decorative concrete floors are exactly alike.
  2. FSI Waterbased Stain: A combination of uv stable pigments and a waterbased emulsion which can colorize a concrete slab to mimic the variations of acid stain but with the added benefit of near limitless colors. The colors and tones of the floor vary from concrete to concrete. The uniqueness of the product is what makes waterbased stain concrete a highly desired flooring option. No two such decorative concrete floors are exactly alike.
  3. FSI Dye: A Solvent Dye that is specially designed to penetrate and color deep into the concrete surface to obtain optimum performance. It was created for use with polished concrete, but can be used as a base color or touch up for concrete as well. This dye can be mixed with acetone, xylene and other solvent carriers.

3. Epoxy Flooring Systems:

  1. FSI Roll Coat: A medium-build protective coating consisting of a two-component epoxy primer and a two-component epoxy topcoat. It offers a high-gloss, easy-to-clean surface with good chemical and abrasion resistance.
  2. FSI Chip: A medium-build vinyl paint chip flooring system. It provides a tough, easy-to-clean surface that is abrasion, chemical and impact resistant. FSI Chip floors offer a wide range of creative possibilities with unlimited color and size combinations. Larger chips will produce looks similar to terrazzo or granite, while smaller chips produce a hard surface carpet appearance.
  3. FSI Quartz: A 1/8th-inch thick decorative color quartz flooring system offering excellent abrasion and impact resistance. It can be combined with an optional polyurethane topcoat for areas needing improved chemical resistance and cleanability.
  4. FSI Slurry Broadcast: A high-build, self-leveling slurry system consisting of a two-component epoxy primer, two-component epoxy slurry and a two-component chemical-resistant polyurethane topcoat.
  5. FSI Mortar: A three-component, high-performance troweled epoxy mortar system consisting of a low-viscosity epoxy resin combined with a proprietary blend of graded aggregates. It’s installed at 1/8 to ¼-inch thickness, and it can be sealed with a variety of topcoats specific to environmental demands. It cures to a hard, impact-resistant flooring system with good abrasion and chemical resistance.
  6. FSI Metallic: A seamless, resinous flooring systems that possess a truly unique, three-dimensional appearance. Depending on the application techniques used, the finished floor’s appearance can range from soft and subtle to striking and vivid.